slogan.png
logo.jpg
kse-v.jpg
startseite.png
aktuell.png
aktiv_unternehmen.png
aktiv_ansprechpartner.png
aktiv_produkte.png
aktiv_gebrauchtmaschinen.png
aktiv_stalleinrichtung.png
aktiv_prospektbestellung.png
newsletter.png
aktiv_biegemaschinen.png
minima.png
eh250.png
ems251.png
ksi252_ksi602.png
aktiv_kse_ksev.png
mammut.png
p884.png
u32-10.png
mbh301v_601v.png
do40-8_do40-10.png
platzhalter.png
aktiv_schneidemaschinen.png
aktiv_betonstahl.png
handling-transport.png
Type KSE and KSE V
Reinforced steel mesh bending machine

Universal high-capacity bending machines for the treatment of welded wire meshes

A mechanical, continuously adjustable set-up of three different bending angles up to 180¡ is possible by means of adjusting fingers supplied in series. The bending roll rail prevents damages of the welded wire mesh. This one can be adjusted quickly by means of a hand crank. The large volume bending beam guaranties exact bending angles.

Standard equipment
  • Continuously moveable bending cams with 30 mm mandrel diameter. Distance marked 100 mm and 150 mm. Centrally controlled locking system, geared motor and foot switch control.

Special equipment
  • Continuously moveable bending cams with 45, 60 and 75 mm mandrel diameter for greater bending radii
  • Special bending cams for 50 mm welded wire mesh partition
  • Additional fingers make it possible to complete numerous further bending angle adjustments
  • Continuously moveable bending cams with 45, 60 and 75 mm mandrel diameter for greater bending radii
  • Special bending cams for 50 mm welded wire mesh partition
  • Additional fingers make it possible to complete numerous further bending angle adjustments
  • For the efficient manufacture of reinforcing baskets: Automatic measuring stop with computer-controlled program system type IV for measuring length and bending angle inputs
  • 100 storeable basket variants each with 6 measuring length and bending angles
  • Measuring length from 75 mm up to 1.500 mm
  • Switchover to manual control. Measuring stop with manual adjustment of the welded wire mesh stops
  • Measuring length from 75 mm up to 2.000 mm
  • Program control by means of pin circuit type I including angle correction switch. By means of the program control up to six different bending angles can be preselected and called on demand
  • The bending angle can be readjusted by means of the correction switch
  • The program control is mounted in eye level
  • Computer-controlled program control system type II with +/- angle correction. Possibility of preselection for 8 different bending angle inputs and 100 storable basket variants including switchover to manual control.

Download data sheet (PDF)
 
impressum.png




Powered by Core Design
firma.png
adresse.png